full of … these

Blue Iris Error: 8000274d (OnConnect: 10061), block 0.

Posted: June 15th, 2011 | Author: | Filed under: idiots | Tags: | No Comments »

If you upgraded recently, automatically or not, and you can’t see anything in cameras added to Blue Iris you might have connectivity issues.

To debug this, telnet to the ip and port you have using in the camera settings.

If telnet is not working stop the firewall to be sure you are not  limited by it.  And try again in blue iris.

If still no luck, open tcpview, reset camera and quickly check the ports blue iris is accessing.

Compare the port actually used to the one you have setup on the camera. You may find that after the upgrade the ports were changed in blue iris.

I have found that my video port was replaced with default video port (port 554) and web port was changed to my custom video port.



Leave a Reply